SMX.dms-a Strain Sensor
Strain Sensors
Easy to replace as configuration parameter can be transferred to the replacement sensor. The SMX.dms-a provides a digital (CAN bus) and an analog output signal and is extremely robust. The sensor has an ECE type approval for vehicles
ABOUT SMX.dms-a Strain Sensor ()
The newly developed hardware of SMX.dms-a allows a lower height for the housing. The assembly points are identical to those of the predecessor product, thus enabling the seamless transition in already existing applications. As before, both an analog and a digital output are available. Furthermore, the STW open-source Software Platform openSYDE is supported, which allows easy integration into already existing systems and is used for the commissioning of sensors.
Conventional strain sensors are hard to install and put into operation. Due to its optimized connection technology, the installation of the DMS can be very well integrated into the production process of e.g. mobile machines. The sensor is intended either for direct mounting or it can be delivered pre-assembled with an optional carrier plate.
In case of servicing, the sensor can be easily replaced on site. As the configuration data are adopted, the new sensor can be put into operation without requiring further alignment, meaning that the system is ready for operation again within a very short time.
Strain sensor for measurement of deflections, e.g. of metal arms, in various directions, which allows an indirect recording of forces, weights or vibrations
Optimized assembly technology for easy commissioning directly at the production line
Optionally also available pre-mounted on carrier plate
Robust design for harsh environments
Easy to service as configuration parameter can be transferred to the replacement sensor
Integrated in STW software toolchain openSYDE
With ECE type approval
Economically available in small quantities
Measurement span adjustable in steps from 120 µm/m up to 2000 µm/m, with configurable offset and measurement range within ± of the selected span
Operating temperature range -40 ... +85 °C (-40 ... +185 °F)
CAN interface, current loop interface (optional)
High signal to noise ratio (SNR) of output signals
Protection class IP6K5 / IPX7 / IPX9K (when installed or pre-mounted on carrier plate)