F02 Safety Pressure Sensor
Pressure Sensors
F02 is based on the tried and tested type M01. F02 is designed for safety-relevant applications, which require a Performance Level PL d, AgPL d or SIL 2.
ABOUT F02 Safety Pressure Sensor (F02 Safety)
The F02 has been designed for application in systems which require a pressure transmitter with functional safety. It is based on the tried and tested type M01, and has a thin-film measurement cell made from stainless steel which is welded together with the pressure sensor and thus guarantees high media compatibility.
F02 safety is available for pressure ranges to 1,200 bar. The sensor signal is made available at two outputs in parallel, whereby the second output represents an inverted signal. Users can choose between a ratio-metric and an 4-20-mA output in three-wire technology. Due to the two-channel architecture, it is possible for a downstream control unit to not only check the functionality of the F02 Safety, but also to monitor the signal path. This allows the use in safety-relevant applications, which require a Performance Level PL d, AgPL d or SIL 2.
The maximum permitted media temperature range extends from -40…+125 °C. The total accuracy in the compensated range of 0…+80 °C lies at <= 1 % FS. The maximum possible flexibility during integration into an existing machine is ensured through the provision of a multitude of available pressure connections as well as the small construction. The electrical contact takes place either via a 5-pole M12 or a Deutsch DT04 connector.
Safety pressure transmitter for applications that require a Performance Level PL d according to EN ISO 13849-1:2015 or AgPL d according to ISO 25119:2010 respectively SIL 2 according to IEC 61508:2010
For mobile hydraulics, alternative drives (CNG, LPG) and industrial sectors
Maximum flexibility through modular design, customization and individualization possible
High media compatibility
Designed for OEM needs
With ECE type approval
Pressure ranges from 0 ... 10 bar to 0 ... 1200 bar (relative) with welded stainless steel measurement cell
Operating temperature range -40 … +85 °C / -40 … +185 °F with media temperatures up to +125 °C / +257 °F
Redundant inverse output signal (either analog current or ratio-metric voltage)
Protection class IP67 and IPX9K
